Using only solar power, the solar charger lets you charge the drone battery to 1C on the ground, using the battery as a buffer or any other 12V battery.
The solar panel charger kit including the following parts:
- 4pcs 100W flexible solar panel
- 1 MPPT solar charge controller 60A/ 12-24V
- 1pcs operational manual copy
The products are sold only integrated in FAE Drones solutions
- 4x100W flexible solar panels
- MPPT solar charge controller 60A/ 12-24V
- Higher Efficiency: Benefit from an efficiency as high as 23% means more sunlight is used to quickly power your devices upto 100W 18V
- For Outdoor Installation: Advanced “Hot-Pressing Method” offers a waterproof design that allows you to take it to the beach and leave it in the rain without any bubbles forming on the surface
- Travel-Friendly Size: Compact and rugged 100W solar panel weighs a mere 3.75 lbs and is easy to carry when hiking, camping, or spending time outdoors
- Bendable Design: Curve the flexible thin plastic sheets to 30 Degree and mount onto an RV, boats, trailers, cabins, tents, or any irregular surfaces easil
- more compack size generate 30% high power than market solar panel , steady perfect generate power performance ,
- Rounding corners to prevent from being scratched
- Hardening process surface prevent from scratched
- easy installed with clue , adhesive, screw,and also grommet at corner is easy for installation
Solar pannel specs:
- Maximum power(Pmax) 100W/panel
- Maximum system voltage 700V DC
- Open circuit voltage(Voc) 21.6V
- Short circuit current(Isc) 6.11A
- Maximum power voltage(Vmp) 17.6V
- Maximum power current(Imp) 5.68A
- Cell efficiency 23%
- Operating temperature（NOCT） 45±2℃
- Temperature range -20℃～+80℃
- Number of cells 36pcs
- Weight 1.7 KG
- Size 1050*540*3mm/1090*540*3mm
- cell style High efficiency Monocrystalline silicon sunpower
- Standard Test Conditions ： lrradiance 1000w/m2，Temperature 25℃,AM=1.5
- Industrial-grade main control chip, 16-level AD sampling accuracy. Temperature, charging current and discharging current are accurately displayed in real time, and the power generation is clear at a glance.
- MPPT auto-focusing technology tracks charging, with high charging efficiency, detection during charging, and two-way focusing tracking.
- Large LCD display with adjustable charging and discharging parameters. The ultra-wide charging and discharging parameters can be adjusted, so long as the characteristics of the battery and its corresponding charging parameters are known， it can be used to charge any battery, and the output is turned off. Minutes and hours can be adjusted, so it is more convenient.
- Complete 3 - stage charge management to effectively protect the battery and make the battery more durable.
- Built - in overheat, overcurrent, short circuit and reverse connection protection. When the fault is eliminated, the controller itself automatically resumes operation without damaging the controller.
- Double MOS tube anti-reflux circuit, high-power charging mode, ultra-low calorific value.
- Humanized design: 3A ( 5521 ) DC charging interface is provided at the lower left side of the front of the controller, and 3A ( 5521 ) DC output interface is provided at the lower right side of the front of the controller to allow direct connection to the bulb.
- Product Name: LCD solar controller
- Material: ROHS+ABS
- Size: about 168*94*35mm/6.61*3.70*1.38in
- Model: YCX003E(60A)
- System voltage: 12 / 24V adaptive
- Rated charging current: 60a
- Rated discharge current: 30a
- Solar photovoltaic voltage :12V battery with 18V solar panel, 24V battery with 36 solar panel
- Full Voltage Value : Lithium Battery (12.2V) | B02 Colloidal Battery (14.2V) | B03 Open Cell (14.6V)
- Floating Charge Voltage : 13.7 V ( Default, Adjustable )
- Discharge cut-off voltage::10.7 V ( default, adjustable )
- Discharge recovery voltage: 12.6 V ( default, adjustable )
- Standby current :10mA
- USB Output : 5V / 2A MAX
- Operating temperature:- 35 - 60